Section 326IAC8-10-4. Means to limit volatile organic compound emissions

   (a) The owner or operator of a refinishing facility subject to this rule shall limit emissions of VOCs from refinishing operations by using coatings or surface preparation products with VOC limits based on the VOC content as applied. The VOC content shall not exceed the following limits:

Coating Category		VOC Limit
		grams	lbs
		liter	gallon
Pretreatment wash primer		780	6.5
Precoat		660	5.5
Primer/primer surfacer		576	4.8
Primer sealer		552	4.6
Topcoat
	Single and two stage	600	5.0
	Three and four stage	624	5.2
Multicolored topcoat		680	5.7
Specialty		840	7.0
For surface preparation products:
Type of Substrate		VOC Limit
		grams	lbs
		liter	gallon
Plastic		780	6.5
Other		168	1.4

  (b) Application of all specialty coatings except anti-glare/safety coatings shall not exceed five percent (5%) by volume of all coatings applied on a monthly basis. (Air Pollution Control Division; 326 IAC 8-10-4; filed Oct 3, 1995, 3:00 p.m.: 19 IR 197; filed Mar 27, 2009, 9:58 a.m.: 20090422-IR-326060603FRA)