20160106-IR-905150455ERA Temporarily adds noncode provisions for licensing requirements for e-liquid manufacturers. Statutory authority: IC 4-22-2-37.1; IC 7.1-7-3-3. Effective January 1, 2016.

TITLE 905 ALCOHOL AND TOBACCO COMMISSION

Emergency Rule LSA Document #15-455(E)

DIGEST

Temporarily adds noncode provisions for licensing requirements for e-liquid manufacturers. Statutory authority: IC 4-22-2-37.1; IC 7.1-7-3-3. Effective January 1, 2016.

SECTION 1. (a) The purpose of this document is, in the absence of federal regulations, to protect public health and safety by:

(1) ensuring the safety and security of e-liquid manufactured for sale in Indiana;

(2) ensuring that e-liquid manufactured or sold in Indiana conforms to appropriate standards of identity, strength, quality, and purity; and

(3) ensuring that e-liquid is not contaminated or adulterated by the inclusion of ingredients or other substances that might pose unreasonable threats to public health and safety.

(b) This document applies to the commercial manufacturing, bottling, selling, bartering, or importing of e-liquid products in Indiana and the sale, possession, and use of e-liquid products in Indiana.

SECTION 2. Any e-liquid or nicotine product, including nonrefillable sealed cartridge electronic cigarettes, sold for use in Indiana may not be sold to anyone less than eighteen (18) years of age.

SECTION 3. (a) The definitions in IC 7.1-7-2 and this SECTION apply throughout this document.

(b) "Commission" or "ATC" means the Indiana Alcohol and Tobacco Commission.

(c) "Packaging" means the process by which e-liquid is bottled in a tamper evident package with a child resistant cap and labeled in compliance with IC 7.1-7. The term does not include the process of preparing to ship or distribute already manufactured and packaged e-liquid.

SECTION 4. (a) Anyone involved in manufacturing an e-liquid for sale to retailers or distributors of e-liquid in Indiana must first obtain an e-liquid manufacturer's permit from the commission. Initial applicants for an e-liquid manufacturer's permit must complete and submit the application prescribed by the commission before June 30, 2016. The application must include the following:

(1) Business name, mailing address, and telephone number of the applicant.

(2) Business name, telephone number, and address of the manufacturing facility.

(3) Full legal name, address, date of birth, Social Security number, and primary telephone contact number for each owner.

(4) Name, telephone number, date of birth, Social Security number, title, and address of the facility managers responsible for the manufacturing facility.

(5) Floor plans, marked as confidential under IC 7.1-7-3-2, of the manufacturing facility that show the layout of the entire manufacturing facility including the following:

(A) The clean room.

(B) The storage room where sample bottles are stored as required by IC 7.1-7-4-6.

(C) All entrances, exits, and interior doors.

(D) All areas open to the public, including areas used for sales or distribution of e-liquids.

(6) An executed security agreement showing compliance with the requirements of IC 7.1-7-4-1(d)(3) and IC 7.1-7-4-6(b)(10) through IC 7.1-7-4-6(b)(15). A security agreement will be treated as confidential and only be released pursuant to a court order.

(7) A verified statement from the security firm that includes the following:

(A) Name of the employee of the security firm who is accredited by the Door and Hardware Institute as an architectural hardware consultant.

(B) Name of the employee of the security firm who is accredited by the International Door Association as a certified rolling steel fire door technician.

(C) Name of the employee of the security firm who is a locksmith.

(D) Statement that the security firm has at least one (1) year of commercial experience, in the preceding year, with the following:

(i) Video surveillance system design and installation with remote viewing capability from a secure facility.

(ii) Owning and operating a security monitoring station with ownership control and use of a redundant offsite backup security monitoring station.

(iii) Operating a facility that modifies commercial hollow metal doors, frames, and borrowed lights with authorization to apply the Underwriters Laboratories label.

(8) Statement that no individuals, corporations, limited liability companies, limited liability partnerships, partnerships or stock owners, members, or partners of such entities with an interest, either directly or indirectly, have any interest, either directly or indirectly, in any e-liquid manufacturer, distributor, or retailer.

(9) A verified statement that all products manufactured for distribution in Indiana contain only the ingredients listed in IC 7.1-7-5-1(a).

(10) An addendum, marked as confidential, that provides a product listing that complies with SECTION 8 of this document.

(11) A verified statement that the facility will comply with manufacturing processes required by IC 7.1-7 and this document.

(12) A verified statement that equipment used is easily cleanable as defined in 410 IAC 7-24-27(a).

(13) A copy of the results of a national criminal history background check for any owner, member, and facility manager or all listed on the permit application, which shall be:

(A) performed by the Indiana state police department or the equivalent law enforcement agency in another state; and

(B) paid directly by the applicant to the entity performing the background check.

(14) The submission and subsequent approval of an application under this SECTION and for the life of the permit operates as consent for the commission or its duly appointed agents to enter the approved manufacturer's premises during normal business hours to conduct physical inspections, product sampling for compliance with requirements of IC 7.1-7, or for the purposes of an audit.

(15) A nonrefundable application fee of one thousand dollars ($1,000).

(16) Any other information as deemed appropriate by the commission to complete review of the application.

(b) The applicant is responsible for notifying the commission within ten (10) business days if any information in the initial application changes. Failure to make a timely and accurate notification about information changes may result in the denial of the application.

SECTION 5. (a) The commission shall complete its review and take final action upon the application within sixty (60) days after receiving all information and documentation required by IC 7.1-7 and this document, including, but not limited to, the following:

(1) The certification by the security firm that the manufacturing facility is in compliance with the requirements of IC 7.1-7-4-1(d)(3) and IC 7.1-7-4-6(b)(10) through IC 7.1-7-4-6(b)(15). A fully compliant service security agreement is executed with the final copy submitted to commission.

(2) All criminal backgrounds checks are final.

(3) Any other outstanding matters required by the commission are satisfied.

(b) An approved manufacturer's permit will not be required for renewal until five (5) years after the date of the initial application's approval or the last renewal.

(c) For an out of state or out of country manufacturing facility that the commission is unable to physically inspect, arrangements may be made for an independent provider approved by the commission to perform such inspection. The out of state approved inspecting facility will be required to submit the results of the inspection directly to the commission via first class mail.

(d) All costs associated with the inspection and reporting will be paid by the applicant.

SECTION 6. (a) Applications for renewals of existing permits must be submitted to the commission on an application form prescribed by the commission at least sixty (60) days before the expiration date of the existing permit and must include the following:

(1) The business name, mailing address, and telephone number of the applicant.

(2) The business name, physical address, and telephone number of the manufacturing facility.

(3) The full legal name, address, and primary telephone contact number for each owner.

(4) The full legal name, address, and primary telephone contact number for each facility manager responsible for the manufacturing facility.

(5) For the five (5) years preceding the date of the renewal application, the annual output in liters of e-liquid manufactured by the applicant.

(6) An executed security agreement, marked as confidential, showing compliance with the requirements of IC 7.1-7-4-1(d)(3) and IC 7.1-7-4-6(b)(15).

(7) Evidence that the security firm complies with the requirements of IC 7.1-7 by either:

(A) a verified statement by the security company that the information provided in the initial application or most recent renewal applicant continues to be correct; or

(B) a verified statement as required by SECTION 4(a)(7) of this document that includes any changes to the security company.

(8) A verified statement that all products manufactured for distribution in Indiana contain only the ingredients listed in IC 7.1-7-5-1(a).

(9) A verified statement that the manufacturing process employed by the applicant complies with the requirements of IC 7.1 and this document.

(10) Written consent allowing the state police department to conduct a state or national criminal history background check on any person listed on the application.

(11) Written consent allowing the commission, if a permit is renewed to the applicant, to enter the premises where the e-liquid is manufactured to conduct physical inspections, sample the product to ensure the e-liquid meets the requirements of e-liquid set forth in IC 7.1-7, and perform an audit.

(12) A nonrefundable application fee in the amount of five hundred dollars ($500).

(13) Any other information as deemed appropriate by the commission that is relevant to the renewal application.

(b) The applicant is responsible for notifying the commission within ten (10) business days if any information in the initial application changes. Failure to make a timely and accurate notification about information changes may result in the denial of the application.

SECTION 7. (a) As used in this SECTION, "sample" means the three (3) ten (10) milliliter sample bottles from each production batch of more than two (2) liters required to be stored or maintained by IC 7.1-7-4-6(b)(15).

(b) Permits are transferable to another person or location only with commission approval.

(c) Permits shall be transferable upon a showing to the commission that:

(1) the permit has not been suspended or revoked and is in good standing; and

(2) the new permit holder and location meet all of the requirements as required by this document.

(d) An e-liquid manufacturer transferring the location of the permit shall maintain the samples in a secure, limited access area during the transfer of location by complying with the following:

(1) The e-liquid manufacturer must notify the commission of the anticipated date the samples will be removed from the original location and the anticipated date the samples will be moved into the new location.

(2) Samples may only be removed from the secure, limited access area with recorded video surveillance at the original location by designated employees of the e-liquid manufacturer.

(3) Samples removed from the secure, limited access area with recorded video surveillance at the original location must be placed immediately in a secure, limited access container or vehicle for transporting to the new permit location.

(4) Video surveillance may not be removed or disconnected from the secure, limited access area until all samples are removed to the secure, limited access container or vehicle.

(5) The secure, limited access area for the storage of samples at the new location must have operational video surveillance before samples may be placed in the area.

(6) The e-liquid manufacturer must notify the commission of the completion of the transfer within five (5) days after the completion of the relocation of the samples and equipment.

(7) The e-liquid manufacturer must maintain a list of employees who had access to the samples during the transfer for a period of three (3) years.

SECTION 8. (a) The manufacturer shall provide a product listing to the commission at the time of the initial application for all e-liquid products manufactured in production batches of more than two (2) liters.

(b) The product listing shall include:

(1) the product name;

(2) for each product, the percentage of nicotine; and

(3) the original date of manufacture of each product.

(c) The manufacturer shall notify the commission within thirty (30) days of the following:

(1) The manufacture of a new e-liquid product manufactured in production batches of more than two (2) liters and the original date of manufacture.

(2) The manufacture of an existing e-liquid product under a new or amended product name and the original date of manufacture under the new or amended product name.

(3) The discontinuation and final manufacture date of an e-liquid product.

(4) The final date of manufacture of a discontinued product.

(d) The manufacturer shall maintain a record of each ingredient used in a production batch for three (3) years and shall provide this information to the commission upon request.

SECTION 9. In order to comply with IC 7.1 relating to e-liquid manufacturing, the manufacturing facility must demonstrate compliance with the following:

(1) An e-liquid container must use a child proof cap that has the child resistance effectiveness set forth in 16 CFR 1700.15(b)(1).

(2) An e-liquid container must use a tamper evident package.

(3) E-liquid containers must be labeled.

(4) Labels on e-liquid containers must identify all ingredients, including nicotine.

(5) The label on an e-liquid container must include a scannable code, including a quick response code, tied to the batch number and date of production. Labels on containers must include date of production, batch number, and the scannable code.

(6) An e-liquid container label or tamper resistant packaging must include a "best if used by" or a manufacture date and be distributed by the manufacturer and sold by the manufacturer or the retailer by the earlier of either the "best if used by" or two (2) years of the date of manufacture.

(7) The manufacturing facility must conduct all mixing and bottling activities in a clean room as defined in IC 7.1.

(8) The manufacturer must take reasonable steps to ensure that an unauthorized ingredient is not included in any e-liquid produced by manufacturer for sale in Indiana.

(9) The manufacturer must take reasonable steps to ensure that all ingredients used in the production of e-liquid are stored in a secure area accessible only by authorized personnel.

(10) The manufacturer must maintain a remotely monitored security system at the facility in all areas where e-liquid is mixed, bottled, packaged, and stored.

(11) The manufacturer shall have a high-security key system that limits access to areas where e-liquid is mixed.

(12) The manufacturer's facility must be subject to twenty-four (24) hour video recording where e-liquids are mixed, bottled, and stored. The video recordings must be retained for at least one hundred eighty (180) days and are subject to commission audit for quality, purity, and compliance reviews.

(13) The manufacturer must take reasonable steps to ensure that only authorized personnel have access to secured areas of the facility where e-liquid is mixed, bottled, and packaged.

(14) The manufacturer must store and maintain three (3) ten (10) milliliter sample bottles from each production batch of more than two (2) liters for a period of not less than three (3) years in a secure, limited access area with recorded video surveillance.

(15) A production log must be maintained listing the following:

(A) Date and time the e-liquid was produced.

(B) The name of the product manufactured.

(C) The amount of the product produced in liters.

(D) The code and batch number.

(E) Any person responsible for the mixing and bottling.

SECTION 10. (a) The commission shall require an e-liquid manufacturer to have at least three (3) different products tested annually by one (1) of three (3) independent laboratories approved by the commission for safety, quality, and purity purposes.

(b) The commission will select the three (3) products to be tested pursuant to subsection (a) from the product listing provided to the commission under SECTION 8 of this document.

(c) Failure by the e-liquid manufacturer to submit or pay the costs of a product testing required by subsection (a) will result in disciplinary action by the commission that may include fines, suspension, and revocation of the permit.

(d) The commission may require the laboratory to test for any of the following:

(1) Nicotine.

(2) Ingredients listed on the label.

(3) Contaminants.

(4) Illegal drugs.

(e) At the discretion of the commission, products that test positive for ingredients other than those listed on the label or on the ingredient list maintained by the e-liquid manufacturer under SECTION 8 of this document may be subject to retesting at the cost of the e-liquid manufacturer.

SECTION 11. SECTIONS 1 through 10 of this document take effect January 1, 2016.

LSA Document #15-455(E)

Filed with Publisher: December 31, 2015, 1:05 p.m.

Posted: 01/06/2016 by Legislative Services Agency

DIN: 20160106-IR-905150455ERA

Composed: Nov 01,2016 2:09:21AM EDT

A PDF version of this document.