Section 865IAC1-7-1. Design and contents of seal

   (a) The land surveyor seal shall be not less than one and five-eighths (1⅝) inches or more than one and seven-eighths (1⅞) inches in outside diameter, using the following design:

865iac1-7-101.gif" width="116" height="114" border="0">

  (b) The seal may:

(1) be:

(A) embossed;

(B) stamped; or

(C) electronically applied;

in conformance with the design as shown in subsection (a); and

(2) have:

(A) a milled edge, as shown in subsection (a); or

(B) two (2) concentric circles with the outer and inner circles corresponding with the respective edges of the milling.

  (c) The name and registration number of the registrant inscribed on the seal shall correspond to the name and certificate number inscribed on the certificate of registration. (State Board of Registration for Professional Surveyors; Rule 7, Sec 2; filed Feb 29, 1980, 3:40 p.m.: 3 IR 632; filed Oct 17, 1986, 2:20 p.m.: 10 IR 441; filed Oct 13, 1992, 5:00 p.m.: 16 IR 878; readopted filed May 22, 2001, 9:55 a.m.: 24 IR 3237; filed May 4, 2006, 1:25 p.m.: 29 IR 3004; readopted filed Nov 9, 2012, 11:26 a.m.: 20121205-IR-865120390RFA) NOTE: 864 IAC 1.1-7-2 was renumbered by Legislative Services Agency as 865 IAC 1-7-1.