Section 675IAC14-4.3-279. Pool types  


Latest version.
  •    Section S4210 Pool types is added as follows:

    (1) S4210.1 Residential pools shall be further classified into types as an indication of the suitability of a pool for use with diving equipment as shown in subdivision (2), Figure No. 4-1. Diving equipment classified at a higher type shall not be used on a pool of a lesser type.

    (2) S4210.2 This subdivision contains Figure No. 4-1, a reference chart of minimum dimensions for residential pools with manufactured diving equipment.

    675090789fra01.jpg

    POOL TYPE

     

    MINIMUM DIMENSIONS

     

    MINIMUM WIDTH OF POOL

     

    D1

    D2

    L1

    L2

    L3

    L4

    L5

    PT. A

    PT. B

    PT. C

    0

    *

    *

    *

    *

    *

    *

    *

    *

    *

    *

    I

    6'-0"

    7'-6"

    1'-6"

    7'-0"

    7'-6"

    6'-9"

    28'-9"

    10'-0"

    12'-0"

    10'-0"

    II

    6'-0"

    7'-6"

    1'-6"

    7'-0"

    7'-6"

    6'-9"

    28'-9"

    12'-0"

    15'-0"

    12'-0"

    III

    6'-10"

    8'-0"

    2'-0"

    7'-6"

    9'-0"

    6'-9"

    31'-3"

    12'-0"

    15'-0"

    12'-0"

    IV

    7'-8"

    8'-6"

    2'-6"

    8'-0"

    10'-6"

    6'-9"

    33'-9"

    15'-0"

    18'-0"

    15'-0"

    V

    8'-6"

    9'-0"

    3'-0"

    9'-0"

    12'-0"

    6'-9"

    36'-9"

    15'-0"

    18'-0"

    15'-0"

    * Diving equipment is prohibited.

    (3) S4210.3 The minimum allowable underwater cross sections at B, C, and D shall be as shown on drawings of Type I through Type V pools (section 4308.4 through 4308.5 of this rule, Figures No. 4-5 through 4-6).

    (4) S4210.4 Constant depth and other swimming pools on which diving equipment is prohibited (Type O) with water depths not exceeding four (4) feet shall not be limited in width, length, or depth of water except as provided in sections 4 and 5 of this rule.

    (5) S4210.5. Stationary diving platforms built on-site shall be located in the diving area of the pool so as to provide the minimum dimension as shown in Figure No. 4-1, at a maximum height of three (3) feet above the waterline. Point "A" shall be eighteen (18) inches in front of the wall at the platform center line. Stationary diving platforms shall not extend more than eighteen (18) inches horizontally over the water from the wall.

    (6) S4210.6 This section contains Figure No. 4-2, a maximum allowable wall slope.

    675090789fra02.jpg

     

    (7) S4210.7 This section contains Figure No. 4-3, relationship of minimum top view dimensions to steps or stairs.

    675090789fra03.jpg

     

    (8) S4210.8 This section contains Figure No. 4-4, relationship of vinyl, fiberglass, gunite, and concrete construction to minimum requirements.

    675090789fra04.jpg

     

    (9) S4210.9 This section contains Figure No. 4-5, minimum dimensions for a Type I pool.

    675090789fra04a.jpg 675090789fra05.jpg

     

    (10) S4210.10 This section contains Figure No. 4-6, minimum dimensions for a Type II pool.

    675090789fra06.jpg

     

    (11) S4210.11 This section contains Figure No. 4-7, minimum dimensions for a Type III pool.

    675090789fra07.jpg

     

    (12) S4210.12 This section contains Figure No. 4-8, minimum dimensions for a Type IV pool.

    675090789fra08.jpg

     

    (13) S4210.13 This section contains Figure No. 4-9, minimum dimensions for a Type V pool.

    675090789fra09.jpg

     

    (14) S4210.14 This section contains Figure No. 4-10, shallow end detail for pool Types II through V.

    675090789fra10.jpg

    (Fire Prevention and Building Safety Commission; 675 IAC 14-4.3-279; filed Mar 25, 2011, 10:19 a.m.: 20110420-IR-675090789FRA; readopted filed Aug 4, 2011, 8:35 a.m.: 20110831-IR-675110254RFA)