Section 675IAC14-4.3-1. Adoption by reference; title; purpose

Section 675IAC14-4.3-2. Chapter 1; administration

Section 675IAC14-4.3-3. Section R202; definitions

Section 675IAC14-4.3-4. Section R301.2; climatic and geographic design criteria

Section 675IAC14-4.3-5. Sections R301.2.1.1 and R301.2.1.2; design criteria, internal pressure

Section 675IAC14-4.3-6. Table R301.2(1); climatic and geographical design criteria

Section 675IAC14-4.3-7. Figures R301.2(1), R301.2(2), R301.2(3), R301.2(4), R301.2(5), R301.2(6), R301.2(7), and R301.2(8)

Section 675IAC14-4.3-8. Table R301.2.1.2

Section 675IAC14-4.3-9. Section R301.2.2; seismic provisions

Section 675IAC14-4.3-10. Section R301.2.2.1; determination of seismic design category

Section 675IAC14-4.3-11. Section R301.2.2.1.1; alternate determination of seismic design category

Section 675IAC14-4.3-12. Section R301.2.2.1.2; alternative determination of seismic design category E

Section 675IAC14-4.3-13. Section R301.2.2.2; seismic limitations

Section 675IAC14-4.3-13.5. Section R301.2.2.2.1; weight of materials

Section 675IAC14-4.3-14. Section R301.2.2.2.2; irregular buildings

Section 675IAC14-4.3-15. Section R301.2.2.3; Seismic Design Category C

Section 675IAC14-4.3-16. Section R301.2.4; flood plain construction

Section 675IAC14-4.3-17. Section R301.5; live load

Section 675IAC14-4.3-18. Table R301.5; minimum uniformly distributed live loads

Section 675IAC14-4.3-19. Section R302.1; exterior walls

Section 675IAC14-4.3-20. Section R302.2; openings

Section 675IAC14-4.3-21. Section R303.1; habitable rooms

Section 675IAC14-4.3-22. Section R303.4.2; exhaust openings

Section 675IAC14-4.3-23. Section R303.6; stairway illumination

Section 675IAC14-4.3-23.5. Section R304.3; minimum dimensions

Section 675IAC14-4.3-24. Section R305.1; minimum height

Section 675IAC14-4.3-25. Section R308.4; hazardous locations

Section 675IAC14-4.3-26. Section R309; garages and carports

Section 675IAC14-4.3-27. Section R310; emergency escape and rescue openings

Section 675IAC14-4.3-28. Section R311.4.3; landings at doors

Section 675IAC14-4.3-29. Section R311.4.4; type of lock or latch

Section 675IAC14-4.3-30. Section R311.5.3.1; riser height

Section 675IAC14-4.3-31. Section R311.5.3.2; tread depth

Section 675IAC14-4.3-32. Section R311.5.6.2; continuity

Section 675IAC14-4.3-33. Section R311.5.6.3; handrail grip size

Section 675IAC14-4.3-34. Section R311.5.8.1; bulkhead enclosure stairways (Repealed)

Section 675IAC14-4.3-34.5. Section R311.6.1; maximum slope

Section 675IAC14-4.3-35. Section R312.1; guards required

Section 675IAC14-4.3-36. Section R312.2; guard opening limitations

Section 675IAC14-4.3-37. Section R313; smoke alarms

Section 675IAC14-4.3-38. Section R314.2.3; attics and crawlspaces

Section 675IAC14-4.3-38.5. Section R317.1; two-family dwellings

Section 675IAC14-4.3-39. Section R317.3.2; membrane penetrations

Section 675IAC14-4.3-40. Section R318.1; moisture control

Section 675IAC14-4.3-41. Section R319.1; location required

Section 675IAC14-4.3-42. Section R319.1.2; R319.1; location required

Section 675IAC14-4.3-43. Section R319.1.2; geographical areas

Section 675IAC14-4.3-44. Section R319.1.3; post, poles, and columns

Section 675IAC14-4.3-45. Section R319.2; quality mark

Section 675IAC14-4.3-46. Section R319.3; fasteners

Section 675IAC14-4.3-47. Section R320.1; subterranean termite control

Section 675IAC14-4.3-48. Section R320.4; foam plastic protection

Section 675IAC14-4.3-49. Section R322; accessibility

Section 675IAC14-4.3-50. Section R323; flood-resistant construction

Section 675IAC14-4.3-51. Section R401.1; application

Section 675IAC14-4.3-52. Section R401.3; drainage

Section 675IAC14-4.3-53. Section R402.1.2; wood treatment

Section 675IAC14-4.3-54. Section R403.1; general

Section 675IAC14-4.3-55. Section R403.1.1; minimum size

Section 675IAC14-4.3-56. Section R403.1.2; continuous footings in seismic design categories D1 and D2

Section 675IAC14-4.3-57. Section R403.1.3; seismic reinforcing

Section 675IAC14-4.3-58. Section R403.1.3.1; foundations with stemwalls

Section 675IAC14-4.3-59. Section R403.1.3.2; slabs-on-ground with turned-down footings

Section 675IAC14-4.3-60. Section R403.1.4.2; seismic conditions

Section 675IAC14-4.3-61. Section R403.1.4.1; frost protection

Section 675IAC14-4.3-62. Section R403.1.6; foundation anchorage

Section 675IAC14-4.3-63. Section R403.1.7.3; foundation elevation

Section 675IAC14-4.3-64. Section R403.1.7.4; alternate setback and clearances

Section 675IAC14-4.3-65. Section R403.1.8; foundations on expansive soils

Section 675IAC14-4.3-66. Table R403.2; size of footings supporting piers and columns

Section 675IAC14-4.3-67. Section R403.3.4; termite damage

Section 675IAC14-4.3-68. Section R404.1; concrete and masonry foundation walls

Section 675IAC14-4.3-69. Section R404.1.1; masonry foundation walls

Section 675IAC14-4.3-70. Section R404.1.2; concrete foundation walls

Section 675IAC14-4.3-71. Section R404.1.5; foundation wall thickness based on walls supported

Section 675IAC14-4.3-72. Section R404.1.5.1; pier and curtain wall foundations

Section 675IAC14-4.3-73. Section R404.1.6; height above finished grade

Section 675IAC14-4.3-74. Section R404.2.1; identification

Section 675IAC14-4.3-75. Section R404.4; insulating concrete form foundation walls

Section 675IAC14-4.3-76. Section R404.4.7.2; termite hazards

Section 675IAC14-4.3-77. Section R405.2.3; drainage system

Section 675IAC14-4.3-78. Section R407.3; structural requirement

Section 675IAC14-4.3-78.5. Section R408.1; ventilation

Section 675IAC14-4.3-79. Section R408.2; openings for under-floor ventilation

Section 675IAC14-4.3-80. Section R408.3; access

Section 675IAC14-4.3-81. Section R408.6; flood resistance

Section 675IAC14-4.3-82. Section R502.1; identification

Section 675IAC14-4.3-83. Section R502.2.1; decks

Section 675IAC14-4.3-84. Table R502.2.1; MAXIMUM SPACING OF FASTENERS FOR LEDGERS SUPPORTING DECKS

Section 675IAC14-4.3-85. Figure R502.2; floor construction

Section 675IAC14-4.3-86. Table R502.3.3(2); cantilever spans for floor joists supporting exterior balcony

Section 675IAC14-4.3-86.5. Table R502.5(1); girder spans and header spans for exterior bearing walls

Section 675IAC14-4.3-87. Section R502.8.1; sawn lumber

Section 675IAC14-4.3-88. Figure R502.8; cutting, notching, and drilling

Section 675IAC14-4.3-89. Section R502.11.1; design

Section 675IAC14-4.3-89.5. Section R502.11.2; bracing

Section 675IAC14-4.3-90. Section R502.11.3; alterations to trusses

Section 675IAC14-4.3-91. Section R502.11.4; truss design drawings

Section 675IAC14-4.3-92. Section R602.1; identification

Section 675IAC14-4.3-93. Section R602.3; design and construction

Section 675IAC14-4.3-93.5. Section R602.3.2; top plate

Section 675IAC14-4.3-94. Figure R602.3(1); typical wall, floor, and roof framing

Section 675IAC14-4.3-94.5. Table R602.3.1; maximum allowable length of wood wall studs exposed to wind speeds of 100 mph or less in seismic design categories A, B, C, and D1

Section 675IAC14-4.3-94.6. Section R602.6.1; drilling and notching of top plate

Section 675IAC14-4.3-95. Figure R602.6(2); notching and bored hole limitations for interior nonbearing walls

Section 675IAC14-4.3-96. Section R602.7; headers

Section 675IAC14-4.3-96.5. Section R602.8; fireblocking required

Section 675IAC14-4.3-97. Section R602.10.1; braced wall lines (Repealed)

Section 675IAC14-4.3-98. Section R602.10.1.1; spacing

Section 675IAC14-4.3-99. Table R602.10.1; wall bracing

Section 675IAC14-4.3-100. Section R602.10.5; continuous structural panel sheathing

Section 675IAC14-4.3-100.5. Section R602.10.8; connections

Section 675IAC14-4.3-101. Table R602.10.11; adjustment of bracing amounts for interior braced wall lines according to braced wall line spacing

Section 675IAC14-4.3-102. Section R604.1; identification and grade

Section 675IAC14-4.3-103. Section R604.3; installation

Section 675IAC14-4.3-104. Section R605.1; identification and grade

Section 675IAC14-4.3-105. Section R606.1.1; professional registration not required

Section 675IAC14-4.3-106. Section R606.2; thickness of masonry

Section 675IAC14-4.3-107. Section R606.2.1; minimum thickness

Section 675IAC14-4.3-108. Section R606.10; anchorage

Section 675IAC14-4.3-109. Section R606.11; seismic requirements

Section 675IAC14-4.3-110. Section R606.11.2; seismic design category C

Section 675IAC14-4.3-111. Figure R606.10(2); requirements for reinforced grouted masonry construction in Seismic Design Category C

Section 675IAC14-4.3-112. Section R607.1.2; masonry in seismic design categories A, B, C, and C1

Section 675IAC14-4.3-113. Section R609.1.5; cleanouts

Section 675IAC14-4.3-114. Section R609.4.1; construction

Section 675IAC14-4.3-115. Section R611.1; general

Section 675IAC14-4.3-115.5. Section R702.3.7; limitations

Section 675IAC14-4.3-115.6. Section R702.4.4; cement, fiber-cement, and glass mat gypsum backers

Section 675IAC14-4.3-116. Table 703.4; weather-resistant siding attachment and minimum thickness

Section 675IAC14-4.3-117. Section R703.7; stone and masonry veneer, general

Section 675IAC14-4.3-118. Figure R703.7; masonry veneer wall details

Section 675IAC14-4.3-119. Section R703.7.4.2; air space

Section 675IAC14-4.3-120. Section R703.7.4.3; mortar or grout filled

Section 675IAC14-4.3-121. Section R703.7.6; weepholes

Section 675IAC14-4.3-122. Section R703.8; flashing

Section 675IAC14-4.3-123. Section R802.1; identification and grade

Section 675IAC14-4.3-124. Section R802.10.1; truss design drawings

Section 675IAC14-4.3-125. Section R802.10.2; design

Section 675IAC14-4.3-125.5. Section R802.10.3; bracing

Section 675IAC14-4.3-126. Section R802.10.4; alterations to trusses

Section 675IAC14-4.3-127. Section R802.10.5; truss to wall connection

Section 675IAC14-4.3-128. Section R803.2.1; identification and grade

Section 675IAC14-4.3-129. Section R806.1; ventilation required

Section 675IAC14-4.3-130. Section R808.1; combustible insulation

Section 675IAC14-4.3-131. Section R903.4.1; overflow drains and scuppers

Section 675IAC14-4.3-132. Section R904.3; material specifications and physical characteristics

Section 675IAC14-4.3-132.5. Section R905.2.8.1; base and cap flashing

Section 675IAC14-4.3-132.6. Section R905.2.8.2; valleys

Section 675IAC14-4.3-132.7. Section R905.2.8.3; crickets and saddles

Section 675IAC14-4.3-133. Section R905.5.3; underlayment

Section 675IAC14-4.3-134. Section R907.3; recovering versus replacement (Repealed)

Section 675IAC14-4.3-135. Figure R1001.6; termination

Section 675IAC14-4.3-136. Section R1003.3; seismic reinforcing

Section 675IAC14-4.3-137. Section R1003.4; seismic anchorage

Section 675IAC14-4.3-138. Section R1005.1; exterior air (Repealed)

Section 675IAC14-4.3-139. Chapter 11; energy efficiency (Repealed)

Section 675IAC14-4.3-139.1. Chapter 11; energy efficiency

Section 675IAC14-4.3-140. Section M1201.1; scope

Section 675IAC14-4.3-141. Section M1201.2; application

Section 675IAC14-4.3-142. Section M1202; existing mechanical systems

Section 675IAC14-4.3-143. Section M1303.1; label information

Section 675IAC14-4.3-143.5. Section M1305.1.3; appliances in attics

Section 675IAC14-4.3-144. Section M1307.3.1; protection from impact

Section 675IAC14-4.3-144.5. Section M1308.3; foundations and supports

Section 675IAC14-4.3-144.6. Section M1406.2; clearances

Section 675IAC14-4.3-144.7. Section M1410.1; general

Section 675IAC14-4.3-145. Section M1411.3.1; auxiliary and secondary drain systems

Section 675IAC14-4.3-145.5. Section M1411.4; insulation of refrigerant piping

Section 675IAC14-4.3-146. Section M1501.3; length limitation

Section 675IAC14-4.3-146.3. Section M1601.3.6; duct separation

Section 675IAC14-4.3-146.5. Section M1703.2.1; size of openings

Section 675IAC14-4.3-147. Section M2001.1; installation

Section 675IAC14-4.3-148. Section M2005.5; anchorage of water heaters

Section 675IAC14-4.3-148.5. Section M2101.5; contact with building material

Section 675IAC14-4.3-149. Section M2201.3; underground tanks

Section 675IAC14-4.3-150. Section M2301.1; general

Section 675IAC14-4.3-151. Section G2401.1; application

Section 675IAC14-4.3-152. Section G2403; general definitions

Section 675IAC14-4.3-153. Section G2404.7; flood hazard

Section 675IAC14-4.3-153.5. Section G2404.10; auxiliary and secondary drain systems

Section 675IAC14-4.3-154. Section G2405.1; structural safety

Section 675IAC14-4.3-154.5. Section G2405.3; engineered wood products

Section 675IAC14-4.3-155. Section G2408.1; general

Section 675IAC14-4.3-155.5. Section G2411.1; gas pipe bonding

Section 675IAC14-4.3-156. Section G2408.3; private garages

Section 675IAC14-4.3-157. Section G2412.1; scope

Section 675IAC14-4.3-158. Section G2412.1.1; utility piping systems located within buildings

Section 675IAC14-4.3-159. Section G2413.2; maximum gas demand

Section 675IAC14-4.3-160. Section G2414.3; other materials

Section 675IAC14-4.3-161. Section G2415.8; protection against corrosion

Section 675IAC14-4.3-162. Section G2415.9.1; individual outside appliances

Section 675IAC14-4.3-163. Section G2415.16; testing of piping

Section 675IAC14-4.3-164. Section G2417; inspection, testing, and purging

Section 675IAC14-4.3-165. Section G2417.6.2; before turning gas on

Section 675IAC14-4.3-166. Section G2417.6.3; test for leakage

Section 675IAC14-4.3-167. Section G2417.7.1; removal from service

Section 675IAC14-4.3-168. Section G2420.2; meter valve

Section 675IAC14-4.3-168.5. Section G2422.1; connecting appliances

Section 675IAC14-4.3-169. Section G2423; CNG gas-dispensing systems

Section 675IAC14-4.3-170. Section G2425.1; scope

Section 675IAC14-4.3-171. Section G2427.6.10; marking

Section 675IAC14-4.3-172. Section G2427.8; venting system termination location

Section 675IAC14-4.3-173. Section G2427.9; condensation drain

Section 675IAC14-4.3-174. Section G2428.1; definitions

Section 675IAC14-4.3-175. Section G2431.1; scope

Section 675IAC14-4.3-176. Section G2438; clothes dryers

Section 675IAC14-4.3-177. Section G2439.5.1; maximum length

Section 675IAC14-4.3-178. Section G2448.1; general

Section 675IAC14-4.3-179. Section G2452.1; general

Section 675IAC14-4.3-180. Section P2501; general

Section 675IAC14-4.3-181. Section P2502; existing plumbing systems

Section 675IAC14-4.3-182. Section P2503.1; inspection required

Section 675IAC14-4.3-183. Section P2503.2; concealment

Section 675IAC14-4.3-184. Section P2503.3; responsibility of permitter

Section 675IAC14-4.3-185. Section P2503.5.2; finished plumbing

Section 675IAC14-4.3-186. Section P2503.7; inspection and testing of backflow prevention devices

Section 675IAC14-4.3-187. Section P2503.7.1; inspections

Section 675IAC14-4.3-188. Section P2503.7.2; testing

Section 675IAC14-4.3-189. Section P2603.1; general

Section 675IAC14-4.3-190. Section P2603.2.1; protection against physical damage

Section 675IAC14-4.3-191. Section P2603.5; pipes through footings or foundation walls

Section 675IAC14-4.3-191.5. Section P2605.1; general

Section 675IAC14-4.3-192. Section P2706.2; standpipes

Section 675IAC14-4.3-193. Section P2706.2.1; laundry tray connection

Section 675IAC14-4.3-194. Section P2717.3; sink, dishwasher, and food grinder

Section 675IAC14-4.3-195. Section P2801.5; required pan

Section 675IAC14-4.3-196. Section P2802.2; temperature control

Section 675IAC14-4.3-197. Section P2901.1; potable water required

Section 675IAC14-4.3-198. Section P2903.5; water hammer

Section 675IAC14-4.3-199. Section P2903.9.1; service valve

Section 675IAC14-4.3-200. Section P3007.1; sewage ejectors or sewage pumps

Section 675IAC14-4.3-201. Section P3007.1.1; ejectors alarms

Section 675IAC14-4.3-202. Section P3101.4; extension outside a structure

Section 675IAC14-4.3-203. Section P3101.5; flood resistance

Section 675IAC14-4.3-204. Section P3103.1; roof extension

Section 675IAC14-4.3-205. Section P3103.2; frost closure

Section 675IAC14-4.3-206. Section P3105.1; maximum distance of fixture trap to vent

Section 675IAC14-4.3-207. Table P3201.4; building traps

Section 675IAC14-4.3-208. Table P3201.7; size of traps and trap arms for plumbing fixtures

Section 675IAC14-4.3-209. Section E3301.2; scope

Section 675IAC14-4.3-210. Section E3301.3; not covered

Section 675IAC14-4.3-211. Section E3303.2; inspection required

Section 675IAC14-4.3-212. Section E3304.2; interrupting rating

Section 675IAC14-4.3-213. Section E3305.6; illumination

Section 675IAC14-4.3-214. Section E3306.5; individual conductor insulation (Repealed)

Section 675IAC14-4.3-214.5. Section E3307.1; grounded conductors

Section 675IAC14-4.3-215. Section E3401; general

Section 675IAC14-4.3-216. Section E3501.6.2; service disconnect location

Section 675IAC14-4.3-217. Table E3503.1; service conductor and grounding electrode conductor sizing (Repealed)

Section 675IAC14-4.3-218. Section E3504.2.1; above roofs

Section 675IAC14-4.3-219. Section E3505.5; protection of service cables against damage

Section 675IAC14-4.3-220. Section E3506.3; available short-circuit current

Section 675IAC14-4.3-220.1. Section E3507.3; two or more buildings or structures supplied from a common service

Section 675IAC14-4.3-220.2. Section E3507.3.1; equipment grounding conductor

Section 675IAC14-4.3-220.3. Section E3508.1; grounding electrode system

Section 675IAC14-4.3-220.6. Section E3509.7; bonding other metal piping

Section 675IAC14-4.3-220.7. Section E3510.1; installation

Section 675IAC14-4.3-220.8. Section E3510.2; enclosures for grounding electrode conductors

Section 675IAC14-4.3-221. Section E3511.1; methods of grounding conductor connection to electrodes

Section 675IAC14-4.3-222. Section E3602.9.1; minimum branch circuit for ranges

Section 675IAC14-4.3-223. Section E3602.10; branch circuits serving heating loads

Section 675IAC14-4.3-224. Section E3602.12; branch circuits serving room air conditioners

Section 675IAC14-4.3-225. Section E3602.12.1; where no other loads are supplied

Section 675IAC14-4.3-226. Section E3602.12.2; where lighting units or other appliances are also supplied

Section 675IAC14-4.3-226.2. Section E3603.1; branch circuits for heating

Section 675IAC14-4.3-227. Section E3604.4; feeder neutral load

Section 675IAC14-4.3-227.1. Table E3701.4; allowable applications for wiring methods

Section 675IAC14-4.3-227.3. Section E3701.5; isolation from gas piping

Section 675IAC14-4.3-227.5. Section E3702.4; in unfinished basements

Section 675IAC14-4.3-227.6. Section E3703.3; grounding

Section 675IAC14-4.3-228. Section E3703.4; protection from damage

Section 675IAC14-4.3-229. Figure E3801.4; countertop receptacles

Section 675IAC14-4.3-229.5. Section E3801.4.1; wall counter space

Section 675IAC14-4.3-230. Section E3801.4.5; receptacle outlet location

Section 675IAC14-4.3-231. Section E3801.6; bathroom

Section 675IAC14-4.3-232. Section E3801.9; basements and garages

Section 675IAC14-4.3-233. Section E3801.11; HVAC outlet

Section 675IAC14-4.3-233.3. Section E3802.4; crawlspace receptacles

Section 675IAC14-4.3-233.5. Section E3802.7; bar sink receptacles

Section 675IAC14-4.3-234. Section E3802.8; boathouse receptacles

Section 675IAC14-4.3-235. Section E3802.11; bedroom outlets

Section 675IAC14-4.3-236. Section E3803.3; additional locations (Repealed)

Section 675IAC14-4.3-237. Section E3805.1; box, conduit body, or fitting; where required

Section 675IAC14-4.3-238. Section E3805.3.1; nonmetallic-sheathed cable and nonmetallic boxes

Section 675IAC14-4.3-239. Section E3805.3.2; securing to box

Section 675IAC14-4.3-239.5. Section E3805.12.2.1; conductor fill

Section 675IAC14-4.3-240. Section E3806.5; in wall or ceiling

Section 675IAC14-4.3-241. Section E3806.8.2.1; nails and screws

Section 675IAC14-4.3-241.5. Section E3807.2; damp or wet locations

Section 675IAC14-4.3-242. Section E3807.7; cables

Section 675IAC14-4.3-243. Section E3808.7; load side equipment

Section 675IAC14-4.3-244. Section E3808.8; types of equipment grounding conductors

Section 675IAC14-4.3-244.5. Section E3808.8.3; nonmetallic sheathed cable

Section 675IAC14-4.3-245. Section E3901.3; indicating (Repealed)

Section 675IAC14-4.3-246. Section E3902.9; outdoor locations

Section 675IAC14-4.3-247. Section E3902.10; exterior wet locations

Section 675IAC14-4.3-247.5. Section E3902.11; bathtub and shower space

Section 675IAC14-4.3-248. Section E3902.13; outdoor installation

Section 675IAC14-4.3-248.5. Section E3903.10; bathtub and shower areas

Section 675IAC14-4.3-249. Section E3903.11; fixtures in clothes closets

Section 675IAC14-4.3-249.5. Section E4103.1.3; GFCI protection

Section 675IAC14-4.3-250. Table E4103.5; overhead conductor clearances

Section 675IAC14-4.3-251. Section E4104.1; bonded parts (Repealed)

Section 675IAC14-4.3-251.1. Section E4104.1; bonded parts

Section 675IAC14-4.3-251.5. Section E4104.3; methods of bonding

Section 675IAC14-4.3-251.6. Section E4104.4; pool water

Section 675IAC14-4.3-252. Section E4106.8.2; other enclosures (Repealed)

Section 675IAC14-4.3-253. Section E4106.10; electrically operated pool covers (Repealed)

Section 675IAC14-4.3-254. Section E4106.12.2; permanently wired radiant heaters

Section 675IAC14-4.3-254.5. Section E4107.2; ground-fault circuit-interrupters required

Section 675IAC14-4.3-254.7. Section E4107.4; receptacle locations

Section 675IAC14-4.3-255. Section E4201.2; definitions

Section 675IAC14-4.3-256. Section E4201.3; spread of fire or products of combustion

Section 675IAC14-4.3-257. Chapter 43; referenced standards

Section 675IAC14-4.3-258. Appendix A; sizing and capacities of gas pipe

Section 675IAC14-4.3-259. Appendix B; sizing of venting systems serving appliances equipped with draft hoods, Category 1 appliances, and appliances listed for use and Type B vents

Section 675IAC14-4.3-260. Appendix C; exit terminals of mechanical draft and direct-vent systems

Section 675IAC14-4.3-261. Appendix D; recommend procedure for safety inspection of an existing appliance installation

Section 675IAC14-4.3-262. Appendix E; manufactured housing used as dwellings

Section 675IAC14-4.3-263. Appendix F; radon control methods

Section 675IAC14-4.3-264. Appendix G; swimming pools, spas, and hot tubs

Section 675IAC14-4.3-265. Appendix H; patio covers

Section 675IAC14-4.3-266. Appendix I; private sewage disposal

Section 675IAC14-4.3-267. Appendix J; existing buildings and structures

Section 675IAC14-4.3-268. Appendix K; sound transmission

Section 675IAC14-4.3-269. Appendix L; ICC International Residential Electrical Provisions/National Electrical Code Cross Reference

Section 675IAC14-4.3-270. Swimming pools; special provisions

Section 675IAC14-4.3-271. Swimming pools; definitions

Section 675IAC14-4.3-272. Structural design

Section 675IAC14-4.3-273. Materials of construction

Section 675IAC14-4.3-274. Dimensional design

Section 675IAC14-4.3-275. Walls

Section 675IAC14-4.3-276. Floor slope

Section 675IAC14-4.3-277. Water depth

Section 675IAC14-4.3-278. Minimum vertical clearances

Section 675IAC14-4.3-279. Pool types

Section 675IAC14-4.3-280. Offset ledges and underwater seat benches

Section 675IAC14-4.3-281. Decks and deck equipment

Section 675IAC14-4.3-282. Circulation piping

Section 675IAC14-4.3-283. Pool egress

Section 675IAC14-4.3-284. Diving equipment

Section 675IAC14-4.3-285. Swimming pool slides

Section 675IAC14-4.3-286. Circulation system

Section 675IAC14-4.3-287. Filters

Section 675IAC14-4.3-288. Pumps

Section 675IAC14-4.3-289. Return inlets and suction outlets

Section 675IAC14-4.3-290. Surface skimmer systems

Section 675IAC14-4.3-291. Electrical requirements

Section 675IAC14-4.3-292. Heaters

Section 675IAC14-4.3-293. Water supply

Section 675IAC14-4.3-294. Wastewater disposal

Section 675IAC14-4.3-295. Disinfectant; oxidation; chemical feeder equipment

Section 675IAC14-4.3-296. Safety features