Section 329IAC15-3-6. Registration of waste tire processing operations

   (a) An application for registration of a waste tire processing operation must be completed on a form provided by the department. The completed application form must contain all information requested on the form. The following must be submitted with the application form:

(1) A United States Geological Survey seven and one-half (7 ½) minute topographic map or equivalent that shows the boundaries of the waste tire processing operation.

(2) A legible map of the waste tire processing operation that shows the following:

(A) Property boundaries.

(B) On-site buildings.

(C) The location and dimensions of each area to be used to hold waste tires for processing.

(D) Separation distances between waste tire holding areas and the following:

(i) Buildings.

(ii) Fences.

(iii) Property boundaries.

(iv) Other waste tire holding areas.

(v) Other accumulated materials.

(3) A description of the following:

(A) Buildings, signs, notices, and alarms to be used to manage waste tires at the facility.

(B) The program that will be used to manage waste tires at the facility, including the following:

(i) The anticipated sources and amounts of incoming waste tires.

(ii) The names and locations of the anticipated destinations of the waste tires.

(iii) The method and schedule for the following:

(AA) Draining incoming waste tires.

(BB) Preventing waste tires from accumulating water.

(4) The contingency plan required by section 18 of this rule.

(5) A description of the measures the owner or operator will use to ensure that the operation will not accumulate either of the following:

(A) One thousand (1,000) or more waste tires at any time outdoors or in a structure that is not completely enclosed.

(B) Two thousand (2,000) or more waste tires indoors within a completely enclosed structure.

(6) The application fee required by IC 13-20-21-3.

  (b) Except as provided in section 6.5 of this rule:

(1) a separate certificate of registration is required for each waste tire processing operation; and

(2) a new certificate of registration is required for a waste tire processing operation that is relocated.

  (c) Registration under this rule does not guarantee that the waste tire processing operation complies with applicable county or local ordinances.

  (d) Before beginning processing of waste tires, the person who applies for a certificate of registration for a waste tire processing operation shall submit a copy of the:

(1) completed application;

(2) contingency plan required by section 18 of this rule; and

(3) map of the waste tire processing operation required by subsection (a)(2);

to the fire department with jurisdiction over the waste tire processing operation. (Solid Waste Management Division; 329 IAC 15-3-6; filed Oct 10, 2000, 3:10 p.m.: 24 IR 321; errata filed Oct 23, 2000, 9:50 a.m.: 24 IR 688; filed Nov 30, 2006, 4:16 p.m.: 20061227-IR-329050168FRA; readopted filed Jul 18, 2012, 2:26 p.m.: 20120815-IR-329120206BFA)