Section 327IAC6.1-4-4. Site-specific permits

   (a) For a biosolid to qualify under a site-specific permit, the following criteria must be met:

(1) Either of the pathogen requirements:

(A) Class A in section 13(b) of this rule; or

(B) Class B in section 13(c) of this rule.

(2) Compliance with the vector attraction reduction requirements in section 15 of this rule.

(3) The pollutant limits in Table 1 in section 9(a) of this rule must not be exceeded.

  (b) For an industrial waste product to qualify under a site-specific permit, the pollutant limits in Table 1 in section 9(a) of this rule must not be exceeded.

  (c) A completed permit application must:

(1) be submitted to the commissioner on forms and in a format prescribed by the commissioner;

(2) include analytical data that demonstrates that pollutant concentrations do not exceed the limits in Table 1 in section 9(a) of this rule;

(3) for a biosolid, provide the documentation of methods of pathogen reduction and vector attraction reduction as required by sections 13 and 15 of this rule; and

(4) include any other information as may be required by the commissioner to ensure compliance with this article.

  (d) A person who prepares a biosolid or industrial waste product that has a site-specific permit shall comply with:

(1) all permit conditions;

(2) unless specified otherwise, all requirements under this rule;

(3) other applicable parts of this article; and

(4) the submission of monthly reports in accordance with section 18 of this rule.

(Water Pollution Control Division; 327 IAC 6.1-4-4; filed May 15, 1998, 10:20 a.m.: 21 IR 3789; readopted filed Jan 10, 2001, 3:23 p.m.: 24 IR 1518; filed Jul 7, 2003, 4:25 p.m.: 26 IR 3605; readopted filed Nov 21, 2007, 1:16 p.m.: 20071219-IR-327070553BFA; readopted filed Jul 29, 2013, 9:21 a.m.: 20130828-IR-327130176BFA)