Section 326IAC13-1.1-12. On-road testing

   On-road testing shall be part of the enhanced emissions testing system, but is to be a complement to testing otherwise required as follows:

(1) On-road testing shall measure on-road emissions through the use of remote sensing devices or roadside pullovers, including tailpipe emissions testing. The department may require roadside pullover emissions testing of motor vehicles. Roadside pullover tailpipe emission testing shall consist of either idle or two (2) speed testing.

(2) If a violation is detected through on-road testing, the motorist shall be notified that the vehicle is required to pass an out-of-cycle follow-up inspection at a facility. For remote on-road testing, notification of results may be made to the motorist by mail or immediate notification.

(3) Motorists shall comply with on-road testing and, upon notification that a follow-up inspection is required, shall present the vehicle for inspection within thirty (30) days of the date of the notification. Motorists are required to make the necessary repairs to pass a reinspection. The penalty for noncompliance with this requirement shall be suspension of the motorist's vehicle registration.

(Air Pollution Control Division; 326 IAC 13-1.1-12; filed Jun 21, 1995, 4:00 p.m.: 18 IR 2735; readopted filed Jan 10, 2001, 3:20 p.m.: 24 IR 1477)